SRX Services Gateway
Highlighted
SRX Services Gateway

Fabric interfaces Physical up / Monitored dwon

‎02-18-2020 12:32 AM

Hello, everybody,

I have the following situation with a SRX 4600

fab.JPG

Why does the status up but monitoring down show me?

Is there an order telling me what it is?

show chassis cluster information

info.JPG

 

Thanks for you help

 

4 REPLIES 4
Highlighted
SRX Services Gateway

Re: Fabric interfaces Physical up / Monitored dwon

‎02-18-2020 10:39 PM

Hi,

 

The monitoring down means no Fabric probes are sent/received over the fabric link. Lets double check the interfaces show up physically with: > show interfaces terse | match fab

 

Then to check on the fabric probes try: > show chassis cluster statistics

 

Also share the output of the following commands (root access required):

 

> request pfe execute command "show usp ha fabric status" target node0.fpc0

> request pfe execute command "show usp ha fabric status" target node1.fpc0

> request pfe execute command "show usp ha fabric statistics" target node0.fpc0

> request pfe execute command "show usp ha fabric statistics" target node1.fpc0

> request pfe execute command "show usp ha fabric next-hop status" target node0.fpc0

> request pfe execute command "show usp ha fabric next-hop status" target node1.fpc0

> request pfe execute command "show usp ha fabric information" target node0.fpc0

> request pfe execute command "show usp ha fabric information" target node1.fpc0

 

Pura Vida from Costa Rica - Mark as Resolved if it applies.
Kudos are appreciated too!
Highlighted
SRX Services Gateway

Re: Fabric interfaces Physical up / Monitored dwon

‎02-19-2020 06:50 AM

Please also gather:

 

> request pfe execute command "show nhdb management fabric" target node0.fpc0

> request pfe execute command "show nhdb management fabric" target node1.fpc0

 

Pura Vida from Costa Rica - Mark as Resolved if it applies.
Kudos are appreciated too!
Highlighted
SRX Services Gateway

Re: Fabric interfaces Physical up / Monitored dwon

‎02-19-2020 12:57 PM

Hi ANFAFFM,

 

What Junos code are you at?

 

This problem was  reported with dedicated fabric ports (xe-0/0/2, xe-0/0/3)  on certain Junos codes.

 

An upgrade to any of these codes can help address this.

junos:18.2R3-S1 junos:18.3R3 junos:18.4R2-S1 junos:18.4R3 junos:19.1R2 junos:19.2R1-S1 junos:19.2R2 junos:19.3R1 junos:19.4R1

Alternately, a reboot should also be a temporary resolution. 

 

Cheers

Pooja

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!

Highlighted
SRX Services Gateway

Re: Fabric interfaces Physical up / Monitored dwon

‎03-31-2020 01:47 PM

Hi,

 

Were you able to fix this issue?

 

Pura Vida from Costa Rica - Mark as Resolved if it applies.
Kudos are appreciated too!
Feedback