Hello, I want to know if it is possible to convert our Firewall ASA 5540 configuration file to Juniper SRX 5400. If this is how is it done for the conversion?
As part of this move, The SRX 5400 Firewalls need to be reprogrammed the same way as the ASA. Could you please advise on a way to ease this process, and make it eas and smooth.
Unfortunately, there is no conversion tool for the ASA to SRX. This will need to be a manual process. Juniper does have a tool for Cisco IOS to Junos, but there are significant differences to the ASA style that this may not save you much time.
After you run the config through here, you could post questions about specific sections that are not recognized. We may need some kind of network diagram as well depending on the features.
If this is too daunting, you can look for a Juniper Partner to assist, but that would obviously require a budget.
Cisco ASA configuration is completely different from IOS which runs on other cisco devices, hence the IOS to Junos converting tool would not be of much help.
You have two options :-
Please mark my solution as accepted if it helped, Kudos are appreciated as well.
Thank you everybody for your help.
So what about PIX/ASA to Junos converter? They could Help?
If yes does it exist in a new version?
You can find that tool in the following link :-
However, this is not an official tool and is not supported by Juniper TAC. I am not sure about the success of the tool.