SRX Services Gateway
Highlighted
SRX Services Gateway

HOW TO BUNDLE LAYER 3 INTERFACES ON SRX 1500

[ Edited ]
‎06-08-2017 07:36 AM

Hello,

 

I have SRX 1500 and i want to bundle to the XE ports and assign IP addresses to them, how can i do it?

 

Thank you in advance.

 

2 REPLIES 2
Highlighted
SRX Services Gateway

Re: HOW TO BUNDLE LAYER 3 INTERFACES ON SRX 1500

‎06-08-2017 02:20 PM

Here is an example of setting up the AE bundle between the SRX and EX

 

https://kb.juniper.net/InfoCenter/index?page=content&id=KB22474

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home
Highlighted
SRX Services Gateway

Re: HOW TO BUNDLE LAYER 3 INTERFACES ON SRX 1500

‎06-09-2017 01:26 AM

if your SRX is in cluster please follow KB shared by Steve, if you dont have cluster you can follow any of below URLS

 

http://www.juniper.net/documentation/en_US/junos/topics/example/chassis-cluster-lag-lacp-configuring...

https://www.fir3net.com/Firewalls/Juniper/juniper-srx-how-do-i-configure-lacp-8023ad.html

 

Replace interface type ge/fe with xe

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too
Feedback