SRX

last person joined: 13 hours ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.
  • 1.  High CPU on eventd process w/IDP

    Posted 06-20-2013 13:59

    I have deployed 6 clusters of SRX220H's and a cluster of SRX240's.  After installing IDP or just simply deactivating and reactivating in the config, in nearly every deployment after a few days the eventd process goes haywire and causes a huge bottleneck in performance.  The bottleneck isn't caused by IDP itself, but rather this eventd process.  Issuing a "restart event-processing" fixes the issue temporarily but after some time it just goes back to craziness.  Is anyone else experiencing this problem?  I'm using a complete mix of releases (11.4R6 to 11.4R8.6 and even 12.1 on one of the clusters) so its not specific to a version.

     

    This is what I'm seeing:

     

    --------------------------------------------------------------------------
    last pid: 87405;  load averages:  0.02,  0.04,  0.00  up 71+19:04:40    22:24:04
    103 processes: 15 running, 76 sleeping, 1 zombie, 11 waiting
    
    Mem: 116M Active, 106M Inact, 589M Wired, 109M Cache, 112M Buf, 49M Free
    Swap:
    
    
      PID USERNAME    THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU COMMAND
     1154 root          5  76    0   498M 49184K select 0 1905.2 7615.67% flowd_octeon_hm
      902 root          1  76    0 12624K  4640K select 0   1:24 338.33% eventd
       22 root          1 171   52     0K    16K RUN    0 1490.1 84.18% idle: cpu0
       24 root          1 -20 -139     0K    16K RUN    0 869:43  0.00% swi7: clock
        5 root          1 -16    0     0K    16K rtfifo 0 432:34  0.00% rtfifo_kern_recv

     

    --------------------------------------------------------------------------
    last pid: 40009;  load averages:  0.06,  0.11,  0.07  up 29+22:50:05    13:00:15
    136 processes: 17 running, 107 sleeping, 1 zombie, 11 waiting
    
    Mem: 166M Active, 138M Inact, 586M Wired, 37M Cache, 112M Buf, 43M Free
    Swap:
    
    
      PID USERNAME  THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU COMMAND
      898 root        1  76    0 12580K  4488K select 0  12:34 639.06% eventd
     1264 root        5  76    0   498M 49188K select 0 806.4H 99.95% flowd_octeon_hm
       22 root        1 171   52     0K    16K RUN    0 596.5H 79.69% idle: cpu0
       24 root        1 -20 -139     0K    16K RUN    0 499:11  0.00% swi7: clock
        5 root        1 -16    0     0K    16K rtfifo 0 201:53  0.00% rtfifo_kern_recv
     1155 root        1  76    0 12296K  6216K select 0 133:30  0.00% license-check
    

     



  • 2.  RE: High CPU on eventd process w/IDP

    Posted 06-20-2013 17:54

    Hi,

     

    can you please try to  use the Junos recommended by JTAC?

     

    Here are the recommended for your SRX:

     

    SRX220 Junos 11.4R7.5 Standard 8 April 2013
    SRX240 Junos 11.4R7.5 Standard 8 April 2013

     

     



  • 3.  RE: High CPU on eventd process w/IDP

    Posted 06-20-2013 23:14

    Take a look at this article, it may help point to exactly what is source of the problem.

    http://www.juniper.net/techpubs/software/junos/junos94/syslog-messages/eventd-system-log-messages.html