SRX Services Gateway
Highlighted
SRX Services Gateway

How do i enable ipv6 ips on Juniver SRX 240

[ Edited ]
‎01-10-2018 02:06 AM

I have been using my juniper srx 240 router for a while now and have been fine with just ipv4

 

Now i want to be able o utilize ipv6 

So what i currently have now is link ipv4 public ips to private ips on virtual servers

 

below is example of my config in viewer

 

 

...
...
...
static { rule-set ruleset1 { from zone Internet; rule rule1 { match { destination-address 178.121.160.51/32; } then { static-nat { prefix { 192.168.1.10/32; } } } } rule rule2 { match { destination-address 178.121.160.52/32; } then { static-nat { prefix { 192.168.1.20/32; } } } } ... ... ... proxy-arp { interface ge-0/0/0.0 { address { 178.121.160.51/32; 178.121.160.52/32; 178.121.160.53/32; 178.121.160.54/32; 178.121.160.55/32; 178.121.160.56/32; } } }
...
...
...

 

 

and so on and so on but now i will like to do same for ipv6 how do i do this? I use CLI editor so pasting the code is better than commands for me Thanks for your help in advance

 

1 REPLY 1
SRX Services Gateway

Re: How do i enable ipv6 ips on Juniver SRX 240

‎01-10-2018 02:19 AM
Below URLs will be helpful.

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-interfaces-neighbor-discover...
https://kb.juniper.net/KB25697
Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too