We have the following scenario:-
SiteA ---- Hub (1Gb) ---- SiteB
Data transfer rates are tested between sites using iperf, and also Windows file transfer as a secondary check.
SiteA's results are as expected i.e. the upload and download speeds track the underlying connection. Also, raw internet speed tests are as expected.
SiteB's results are not as expected. The upload is about right, in this instance ~70Mb; however. the download speeds crawl along at 3Mb. Raw internet speed tests are as expected i.e. 90Mb synchronous.
The Hub is a reliable 1Gb connection on a SRX340. There is no rate-limiting.
The sites use SRX320 devices, and the configs are essentially identical.
How can I start to troubleshoot where the issue might lie?
Hope you are testing TCP traffic.
1. Find out MSS value for each site using ping command from the end system and compare whether they are same.
2. Take packet capture from Site A and B test PC and compare the capture. Look for MSS value, TCP re-transmission, fragmentation, delay between request and response etc
© 1999 - 2019 Juniper Networks, Inc.
All rights reserved