SRX Services Gateway
SRX Services Gateway

I think this KB have wrong statement ..

‎08-06-2017 07:12 PM

Hi All,

 

refering  to https://kb.juniper.net/InfoCenter/index?page=content&id=KB30461 it said "2017-06-22: Added that no need to reboot after 15.1X49-D70." but even i'm use D80 it still need to reboot. Hopefully someone from juniper can make this correction

 

[edit]
root@SRX320# run show version
Hostname: SRX320
Model: srx320-poe
Junos: 15.1X49-D80.4
JUNOS Software Release [15.1X49-D80.4]

 

 

Thanks

5 REPLIES 5
SRX Services Gateway

Re: I think this KB have wrong statement ..

‎08-06-2017 11:14 PM

@kronicklez wrote:

 

 

[edit]
root@SRX320# run show version
Hostname: SRX320
Model: srx320-poe
Junos: 15.1X49-D80.4
JUNOS Software Release [15.1X49-D80.4]

 


It appears you have a SRX320.

 

The article states - 

 

Note: As of 15.1X49-D70, for the SRX1500 series, SRX4100, SRX4200, devices and vSRX, you do not need to reboot the device when you are switching modes between flow mode and packet mode. For SRX300 you do need to reboot.

 

Although they look to be very similar, is it possible that the mini-pims need to be rebooted?

 

Incidentally, as I have an issue that is currently being investigated, I have upgraded the SRX300 to D100. It feels more solid, and J-Web is much improved.

SRX Services Gateway

Re: I think this KB have wrong statement ..

‎08-07-2017 01:59 AM

Hi,

 

 

But if u read the KB it have note said above D70 dont need to reboot. I'm not sure whether i'm misunderstanding that sentences or not.

 

Thanks

SRX Services Gateway

Re: I think this KB have wrong statement ..

‎08-07-2017 03:20 AM

Thanks for sharing the feedback

The document need to say "For SRX300- Series you do need to reboot." , not just "SRX300". I have submitted the update/modification request and will be corrected soon.

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too
SRX Services Gateway

Re: I think this KB have wrong statement ..

‎08-07-2017 11:25 PM

@rsuraj wrote:

Thanks for sharing the feedback

The document need to say "For SRX300- Series you do need to reboot." , not just "SRX300". I have submitted the update/modification request and will be corrected soon.


The article states - 

 

Note: As of 15.1X49-D70, for the SRX1500 series, SRX4100, SRX4200, devices and vSRX, you do not need to reboot the device when you are switching modes between flow mode and packet mode. For SRX300 you do need to reboot.

 

The article says nothing about SRX300-Series. It specifically states SRX300. Nothing is said about SRX300 Series - that is something you have imagined.

SRX Services Gateway

Re: I think this KB have wrong statement ..

‎08-07-2017 11:33 PM
That’s something I have tested and confirmed that "reboot is needed on all 300-Series"
Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too