Greeting All,
I am configuring LTE Mini-PIM using verion sim card on srx 320 for the first time and having issues to bring it up.
set interfaces cl-1/0/0 dialer-options pool 1 priority 1
set interfaces cl-1/0/0 act-sim 1
set interfaces cl-1/0/0 cellular-options sim 1 select-profile profile-id 1
set interfaces cl-1/0/0 cellular-options sim 1 radio-access automatic
set interfaces ge-0/0/0 unit 0 backup-options interface dl0.0
set interfaces dl0 unit 0 family inet negotiate-address
set interfaces dl0 unit 0 dialer-options pool 1
set interfaces dl0 unit 0 dialer-options dial-string "*99***3#"
-----------
root# run show modem wireless profiles cl-1/0/0 slot 1
Profile details
Max profiles: 16
Default profile Id: 1
Profile 1: ACTIVE
Valid: TRUE
Access point name (APN): vzwinternet
Authentication: None
------------------------
root# run show modem wireless network cl-1/0/0
LTE Connection details
Connected time: 0
IP: 0.0.0.0
Gateway: 0.0.0.0
DNS: 0.0.0.0
Input bps: 0
Output bps: 0
Bytes Received: 0
Bytes Transferred: 0
Packets Received: 0
Packets Transferred: 0
Wireless Modem Network Info
Current Modem Status: Connecting
Current Service Status: Normal
Current Service Type: CS
Current Service Mode: Unknown
Current Band: WCDMA 850
Network: unknown
Mobile Country Code (MCC): 0
Mobile Network Code (MNC): 0
Location Area Code (LAC): 0
Routing Area Code (RAC): 0
Cell Identification: 0
Access Point Name (APN): vzwinternet
Public Land Mobile Network (PLMN): VerizonWirele
Physical Cell ID (PCI): 284
International Mobile Subscriber Identification (IMSI): 31148030xxxxxxx
International Mobile Equipment Identification (IMEI/MEID): 35907xxxxxxx
Integrate Circuit Card Identity (ICCID): 891480000xxxxxxxxx
Reference Signal Receiving Power (RSRP): 0
Reference Signal Receiving Quality (RSRQ): 0
Signal to Interference-plus-Noise Ratio (SiNR): 0
Signal Noise Ratio (SNR): 0
Energy per Chip to Interference (ECIO): 0
-----------------------------------
root# run show interfaces dl0.0
Logical interface dl0.0 (Index 85) (SNMP ifIndex 536)
Flags: Up Point-To-Point SNMP-Traps 0x0 Encapsulation: ENET2
Dialer:
State: Connecting, Dial pool: 1
Primary interface: ge-0/0/0.0 (Index 74)
Dial strings: *99***3#
Subordinate interfaces: cl-1/0/0 (Index 151)
Activation delay: 0, Deactivation delay: 0
Initial route check delay: 120
Redial delay: 3
Callback wait period: 5
Load threshold: 0, Load interval: 60
Input packets : 168654
Output packets: 0
Security: Zone: Null
Protocol inet, MTU: 1490
Flags: No-neighbor-learn, Sendbcast-pkt-to-re, Negotiate-Address
I have tried different dial string and chap authentication to n/a. I am aslo unable to find any debug commands to check logs. Any suggestions on config changes and/or logs to check? Thank you.