SRX

Hi,

I am trying to upgrade Junos on SRX210HE(EOL)From --> 12.1X44-D45.2 To --> Junos 12.1X46-D86

But i am getting below error. Please suggest correct next upgrade version or how to fix the below issue

Connectivity fault management process: rtslib: WARNING version mismatch for msg notify msg: expected 0 got 98,a reboot or software upgrade may be required
Formatting alternate root (/dev/da0s2a)...
newfs: /dev/da0s2a: failed to open disk for writing
ERROR: Could not format alternate root

-V verify if release based licenses are present
Connectivity fault management process: rtslib: WARNING version mismatch for msg notify msg: expected 0 got 98,a reboot or software upgrade may be required
Connectivity fault management process:
mgd: commit complete
Validation succeeded
Validating against /config/rescue.conf.gz

root@SRX> request system software add /var/tmp/junos-srxsme-12.1X46-D86-domestic.tgz no-copy unlink reboot
NOTICE: Validating configuration against junos-srxsme-12.1X46-D86-domestic.tgz.
NOTICE: Use the 'no-validate' option to skip this if desired.
Formatting alternate root (/dev/da0s2a)...
newfs: /dev/da0s2a: failed to open disk for writing
ERROR: Could not format alternate root

Removing /var/tmp/junos-srxsme-12.1X46-D86-domestic.tgz

Thank in advance..

Hi,

Can you please share "show system snapshot media internal" output?

The issue might be related to lack of dual partition on your hardware... If yes, you need to install dual partition.

https://www.juniper.net/documentation/en_US/junos10.1/information-products/topic-collections/release-notes/10.1/index.html?topic-42304.html

Hi,

root@SRX> show system snapshot media internal
Information for snapshot on internal (/dev/da0s1a) (primary)
Creation date: Sep 25 11:15:30 2015
JUNOS version on snapshot:
junos : 12.1X44-D45.2-domestic
error: cannot mount /dev/da0s2a

Can you please use "request system snapshot slice alternate" and then reboot the device?