SRX Services Gateway
SRX Services Gateway

LAG in chassis cluster

11.18.10   |  
‎11-18-2010 02:40 AM

HI,

 

 

is junos 10.0 support LAG in chaiss cluster?if yes how to configure it in chassis cluster ?with minimum two interface in LAG.plz any one with having same scenario help me by  sharing the idea.

3 REPLIES
SRX Services Gateway
Solution
Accepted by topic author shyan
‎08-26-2015 01:27 AM

Re: LAG in chassis cluster

11.18.10   |  
‎11-18-2010 04:04 AM

From JunOS 10.1 on only. 10.2r3 is considered the current "build of the month", judging by the feedback in this forum. Only supported on SRX3k and SRX5k, not supported on Branch SRX (100 to 650).

 

Documented here: http://www.juniper.net/techpubs/software/junos-security/junos-security10.1/junos-security-swconfig-s...

 

SRX Services Gateway

Re: LAG in chassis cluster

11.18.10   |  
‎11-18-2010 02:49 PM

It's my understanding that L2 features are not suported on branch devices in a cluster.  So only on 3K and 5K and the comming SRX 1400 you could use LAG interfaces when in cluster.

best regards,

Screenie.
Juniper Ambassador,
JNCIA IDP AC WX JNCIS FW SSL JNCIP SEC ENT SP JNCI

If this worked for you please flag my post as an "Accepted Solution" so others can benefit. A kudo would be cool if you think I earned it.
Highlighted
SRX Services Gateway

Re: LAG in chassis cluster

08.18.11   |  
‎08-18-2011 10:13 AM

Is this still the case or is LAG on a 650 cluster now supported in 11.x code?