SRX

Is it possible to set up access to customers shared folders, which using Junos Pulse, from the SRX LAN?

i.e.

LAN user --> Pulse User folder

LAN DHCP pool and DynVPN pool are on the same subnet. I set up NAT proxy-arp for DynVPN pool.

Presently pulse users have access to LAN resources, not vice versa.

Hi Notimer,

I think you will be able to access LAn to Pulse User's Folders .

It is by design that it works oneway and not both ways.

Regards
rparthi
 

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too

Hi,

The Dynamic VPN function on the SRX is one way access - Untrust to Trust.

In order to achive your goal you would need to use a 3rd party dial in client such as Shrew or NCP.  There are some comments on this setup on the forums.

http://forums.juniper.net/t5/SRX-Services-Gateway/NCP-Dial-up-VPN-config/m-p/133273

Also in the MAG Series Remote Access Devices, this is possible too.

MMcD, thanks!