SRX Services Gateway
Highlighted
SRX Services Gateway

No traffic after routing-engine upgrade

‎06-16-2013 11:58 AM

I have a SRX210HE running 12.1X44-D104, and while playing around with it I noticed the RE BIOS was version 2.0 and version 2.2 was available. I ran a request system firmware upgrade re bios, and everything seemed to work fine, but after reboot no traffic is running through the SRX. The configuration looks fine, no alarms showing, but nothing working. Doing a show arp doesn't show anything even if every port is active, a show ethernet-switching table shows nothing but the SRX itself. Is there anything I can do myself or should I request an RMA?

1 REPLY 1
Highlighted
SRX Services Gateway

Re: No traffic after routing-engine upgrade

‎06-16-2013 04:36 PM

Hi,

 

May you please try the recommended Junos Software Release by JTAC here:

 

junosSRX.jpg

 

 

 

 

You may also check the website here:

 

http://kb.juniper.net/InfoCenter/index?page=content&cmid=no&id=KB21476&smlogin=true

 

Thanks!

 

If you find this a solution you may click "Accept Solution".

If you think I deserve a kudos, you may also click the star icon at the bottom of my reply/post.

JNCIA
Juniper Networks Innovative Champion

If you find this as a solution you may click "Accept Solution".
If you think I deserve a kudos, you may also click the star icon at the bottom of my reply/post.
Feedback