SRX Services Gateway
Highlighted
SRX Services Gateway

OSPF areas in a mixed ScreenOS & JunOS network

[ Edited ]
‎01-23-2018 06:08 AM

We have a network consisting of approx. 28 ScreenOS devices i.e. NS5GT, SSG5, SSG20 anSSG-320M. We have OSPF areas numbered as follows 10, 20, 30, 40 etc. I have read that areas are numbered differently in JunOS e.g. 0.0.0.1. The plan is to gradually replace the ScreenOS devices with SRX320 and SRX340 models, but can this be done in a controlled fashion given the different ways OSPF areas are referenced?

1 REPLY 1
SRX Services Gateway
Solution
Accepted by topic author EMTSU
‎08-16-2018 07:14 AM

Re: OSPF areas in a mixed ScreenOS & JunOS network

‎01-23-2018 06:42 AM

OSPF area number is a 32-bit number, the srx displays it in IP-format

but 10 is 0.0.0.10   only for example 300 is 0.0.1.44,

but as far as I know you ca enter the number as number , only display is the IP-format

 

regards