SRX Services Gateway
SRX Services Gateway

OSPF config help

‎05-30-2011 10:58 AM

Hi,

 

I am setting up a Router at top which will run bgp with the isp.

 

Below router is the SRX

 

Below SRX is the 2 core switches.

 

My requirement is that router should give bgp routes to SRX using OSPF.

 

SRX should share the same with Core switches using OSPF.

 

Will run only 1 ospf area 0.

 

For outgoing i want to control only one subnet adverisement to BGP form core switches.

 

Do we have a best config example for this scenario for each device ( Router, SRX, both core switches )

 

 

Raj

1 REPLY 1
Highlighted
SRX Services Gateway

Re: OSPF config help

‎05-30-2011 12:56 PM

I would recommend that your edge routers just inject a 0/0 route into OSPF (assume this is Internet).  Otherwise just advertise some aggregate routes into OSPF.

Doug Hanks
JNCIE-ENT #213, JNCIE-SP #875

Follow me on Twitter @douglashanksjr
Feedback