I am setting up a Router at top which will run bgp with the isp.
Below router is the SRX
Below SRX is the 2 core switches.
My requirement is that router should give bgp routes to SRX using OSPF.
SRX should share the same with Core switches using OSPF.
Will run only 1 ospf area 0.
For outgoing i want to control only one subnet adverisement to BGP form core switches.
Do we have a best config example for this scenario for each device ( Router, SRX, both core switches )
I would recommend that your edge routers just inject a 0/0 route into OSPF (assume this is Internet). Otherwise just advertise some aggregate routes into OSPF.