Hello,
Ospf is stuck at init status. Mikrotik is not receiving ospf packets from juniper.
Ospf trace log (flag:all):
Sep 18 10:08:15.744432 OSPF periodic xmit from 192.168.3.1 to 224.0.0.5 (IFL 77 area 1.1.1.1)
Sep 18 10:08:16.634671 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:16.634718 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:16.634737 task_timer_uset: timer OSPF I/O./var/run/ppmd_control_PPM Hold <Touched> set to offset 2:00 at 10:10:16.634718
Sep 18 10:08:16.634746 OSPF periodic xmit from (null) to 224.0.0.5 (IFL 73 area 1.1.1.1)
Sep 18 10:08:16.885615 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:16.885639 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:16.885659 task_timer_uset: timer OSPF I/O./var/run/ppmd_control_PPM Hold <Touched> set to offset 2:00 at 10:10:16.885639
Sep 18 10:08:16.885667 OSPF hello from 1.1.1.3 (IFL 73, area 1.1.1.1) absorbed
Sep 18 10:08:24.527424 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:24.527474 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:24.527493 task_timer_uset: timer OSPF I/O./var/run/ppmd_control_PPM Hold <Touched> set to offset 2:00 at 10:10:24.527474
Sep 18 10:08:24.527528 OSPF periodic xmit from 192.168.3.1 to 224.0.0.5 (IFL 77 area 1.1.1.1)
Sep 18 10:08:25.335293 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:25.335328 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:25.335347 task_timer_uset: timer OSPF I/O./var/run/ppmd_control_PPM Hold <Touched> set to offset 2:00 at 10:10:25.335328
Sep 18 10:08:25.335400 OSPF periodic xmit from (null) to 224.0.0.5 (IFL 73 area 1.1.1.1)
Sep 18 10:08:26.884333 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:26.884365 task_process_events_internal: recv ready for OSPF I/O./var/run/ppmd_control
Sep 18 10:08:26.884383 task_timer_uset: timer OSPF I/O./var/run/ppmd_control_PPM Hold <Touched> set to offset 2:00 at 10:10:26.884365
Sep 18 10:08:26.884391 OSPF hello from 1.1.1.3 (IFL 73, area 1.1.1.1) absorbed
Well one other thing that did change was srx210 had 1g links, on 5400 i replaced them with 10g (changed config acordingly). And for testing i changed 5400 to use 1g aswell, results were same, tunnel up but ospf is only one-way.
For testing i have set all security zones with
host-inbound-traffic system-service any-service
host-inbound-traffic protocols all
Also Default-policy permit-all
Mtu seems to act differently on each srx box, pinging from 1 lan to another (over ipsec + gre):
srx 5400 max packet size is: ping 192.168.5.1 size 1386 do-not-fragment
but for 210 it is much larger: ping 192.168.5.1 size 9140 do-not-fragment
Is that the root problem here ?
i havent made any mtu changes its all default