SRX Services Gateway
Highlighted
SRX Services Gateway

PPPoE BT Infinity unstable connection

‎02-18-2014 08:20 AM

Hi,

I've used the wizard to configure my SRX210 to use PPPoE using our BT Infinity link. Most of the time the link is fine but we've been having a couple of issues lately with the connection dropping out but not re-establishing itself until the SRX box is physically rebooted. NB: I'm assuming this is the cause as the connection picks up once the box has been rebooted and the ISP has no indication of any outages in the area. 

 

Is there anything in the attached config (which the wizard may miss) that might help SRX re-establish the PPPoE connection should the line drop momentarily?  

 

Cheers

Attachments

3 REPLIES 3
Highlighted
SRX Services Gateway
Solution
Accepted by topic author it@ryedalegroup.co.uk
‎08-26-2015 01:27 AM

Re: PPPoE BT Infinity unstable connection

‎02-18-2014 08:59 AM

What about:

set interfaces pp0 unit 0 pppoe-options idle-timeout 0
set interfaces pp0 unit 0 pppoe-options auto-reconnect 20

JNCIA-Junos, JNCIS-SEC, CCNA, LPI1, soon more...
Highlighted
SRX Services Gateway

Re: PPPoE BT Infinity unstable connection

‎02-19-2014 01:38 AM

Thanks I'll add that to the config and see how it goes...

Highlighted
SRX Services Gateway

Re: PPPoE BT Infinity unstable connection

‎02-20-2014 07:06 AM

The additional 2 lines of config seems to have worked satisfactorily.

Much appreciated