SRX Services Gateway
SRX Services Gateway

Packet mode interface failover

10.06.17   |  
‎10-06-2017 08:43 AM



We have two SRX in packet mode. their are two ISP link connected on per gateway for redundancy.

ISP1 is connected on ge-0/0/0 interface and ISP2 is connected on ge-0/0/1 interface.


Here if ISP1(Primary) down ISP2(Secondary) interface should start communicate. once ISP1 interface come up that should again become primary.


Kindly suggest configuration KB.


Thank you...

SRX Services Gateway
Accepted by topic author
‎10-06-2017 10:03 PM

Re: Packet mode interface failover

10.06.17   |  
‎10-06-2017 10:39 AM

You have 2 ISP connected to each SRX? If so you can use IP-Monitoring feature to failover traffic between the links.



If you are saying ISP1 is on SRX1 and ISP2 on SRX2, ignore this.

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too