SRX Services Gateway
Highlighted
SRX Services Gateway

Pulse Dynamic VPN client keeps disconnecting intermittently

‎09-29-2019 11:34 PM

We had a setup which was working fine with Windows 10 running Pulse Client to connect Dynamic VPN client.

 

Suddenly it started disconnecting intermittently without any reason.

 

Post opening TAC, answer is no current resolution

 

KB - fyR>

https://kb.juniper.net/InfoCenter/index?page=content&id=TSB17441&actp=METADATA&act=login

 

Did any one face this issues?

 

Any resolution tips here..


*************************************
HTH.
Accept this as solution if it resolved your issue.
Kudos would be appreciated too.
2 REPLIES 2
Highlighted
SRX Services Gateway

Re: Pulse Dynamic VPN client keeps disconnecting intermittently

‎09-29-2019 11:43 PM

as you see from the KB it has been an issue for long. I will not expect it to be fixed in any way. There are no interest from neither Juniper or Pulse Secure to find a workable solution as Juniper are looking alternate ways.

 

Your options are either to migrate to Remote Access VPN with the NCP client or await an replacement for dynamic VPN which I heard is on it's way (but I cannot share more knowledge in a public forum, sorry)


--
Best regards,

Jonas Hauge Klingenberg
Juniper Ambassador & Technology Architect, SEC DATACOM A/S (Denmark)
Highlighted
SRX Services Gateway

Re: Pulse Dynamic VPN client keeps disconnecting intermittently

‎09-30-2019 11:44 AM

yes there were issues with windows 10 and pulse client. However NCP client has been stable. you can download it free for demo @ https://www.ncp-e.com/en/exclusive-remote-access-solution/