SRX Services Gateway
Highlighted
SRX Services Gateway

RPM service monitoring in J-Web

[ Edited ]
‎11-28-2019 08:15 PM

Hi, guys,

 

As the weblink below, the rpm test can be viewed in J-WEB:

 

https://www.juniper.net/documentation/en_US/junos/topics/task/operational/security-rpm-probe-monitor...

 

 

J-Web provides friendly WUI for monitoring the performance of a WAN link, but the volumn of data collected is too small (max value set to 20 minutes), how I can collect/configure the rpm results  of a  period of a week or a month for reviewing/monitoring ?

 

Or any ways to store these rpm results (RTT value ) into the SRX locally ?

 

Many thanks in advance.

 

 

2 REPLIES 2
Highlighted
SRX Services Gateway
Solution
Accepted by topic author Ben Ben
‎11-29-2019 01:17 AM

Re: RPM service monitoring in J-Web

‎11-28-2019 08:31 PM

You may use any NMS to poll the RPM data regularly by using SNMP. Please check following URLs for details:

https://kb.juniper.net/InfoCenter/index?page=content&id=KB26139&actp=METADATA

https://www.juniper.net/documentation/software/topics/concept/mib-rpm-junos-overview.html

 

 

 

Thanks,
Nellikka
JNCIE x3 (SEC #321; SP #2839; ENT #790)
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!
Highlighted
SRX Services Gateway

Re: RPM service monitoring in J-Web

[ Edited ]
‎11-28-2019 11:09 PM

 

Thanks a lot.