Dear forums,
I could really use your help on this one...
I have an SRX-240H which has no operating system anymore expect u-boot...
When I boot the device I just get dropped in the u-boot:
U-Boot 1.1.6-JNPR-1.7 (Build time: May 4 2010 - 06:59:58)
SRX_240_HIGHMEM board revision major:1, minor:42, serial #: AABX1828
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM: 1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 4 MB
USB: scanning bus for devices...
Root Hub 0: 4 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 2 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net: octeth0
Switch driver image not programmed properly in bootflash
Expected 0x3c1c0006, actual 0xffffffff
POST Passed
Press SPACE to abort autoboot in 1 seconds
## No elf image at address 0x00100000
=>
I have found many posts referencing to this issue and this KB:
http://kb.juniper.net/InfoCenter/index?page=content&id=KB14175
But it seems that I can't do any TFTP (tftpboot command)... There is just no IP connectivity.
I suspect it is related to this error:
Net: octeth0
Switch driver image not programmed properly in bootflash
Expected 0x3c1c0006, actual 0xffffffff
There is just no driver I think...
I have seen there is also a usbboot option but I have no idea on how to implement it...
I logged a case with support but as always they are no help what so ever... They gave me the upgrade procedure with a usb stick...
I hope someone from the forums can help me on this one?
Thanks in advance!