SNMP Authentication and Privacy password doesn't work
[ Edited ]
a week ago
Configuration Sample and testing commands
If I apply(copy/paste) following block (multiple commands) of SNMP configuration:
set snmp v3 vacm security-to-group security-model usm security-name NetorcUser group NetorcGroup set snmp v3 vacm access group NetorcGroup default-context-prefix security-model usm security-level privacy context-match exact set snmp v3 vacm access group NetorcGroup default-context-prefix security-model usm security-level privacy read-view NetorcViewGLOBAL set snmp v3 vacm access group NetorcGroup default-context-prefix security-model usm security-level privacy notify-view NetorcViewGLOBAL set snmp engine-id use-mac-address set snmp view NetorcViewGLOBAL oid internet include set snmp view NetorcViewGLOBAL oid .1 include set snmp v3 usm local-engine user NetorcUser authentication-sha authentication-password juniper1234 set snmp v3 usm local-engine user NetorcUser privacy-des privacy-password juniper1234
SNMP polling doesn't work, get the following response for walk
snmpwalk -v3 -t 10 -l authPriv -u NetorcUser -a sha -A juniper1234 -x des -X juniper1234 184.108.40.206 snmpwalk: Authentication failure (incorrect password, community or key)
But when I enters the last three commands again (one at a time). SNMP starts working. I have checked on both 15 and 18 version of vSRX.
Re: SNMP Authentication and Privacy password doesn't work
Can you confirm after the bulk entry that all the commands were actually accepted by showing the configuration. I've seen issues where the input buffer on various connections limit the size of a paste text that actually gets passed to the device and just cuts it off at the end of the buffer size so it only appears to be entered but the ending commands are not.
Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP) http://puluka.com/home