SRX

last person joined: yesterday 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  SNMP Configuration issue on SRX

    Posted 06-19-2016 20:51

    Hi All,

     

    While configuring SNMP community string "XYZ"(with IP 192.168.1.30/32)everything goes ok but when i enter commit it returns me following error. 

     

    'interfaces ge-0/0/4.0'
    Interface ge-0/0/4.0 already assigned to another zone
    error: configuration check-out failed

     

    I already have a public community string with ip range 192.168.1.0/24 is configured. Do i need to change this ip range to specific IP or its something different?



  • 2.  RE: SNMP Configuration issue on SRX

    Posted 06-19-2016 22:39

    Can you please share the output of ">show config | display set | match ge-0/0/4" ?

    If we go by the error, it indicates that ge-0/0/4.0 has been configured under two zones.

     

    Regards,

    Srinath



  • 3.  RE: SNMP Configuration issue on SRX
    Best Answer

    Posted 06-20-2016 00:43

    Hi,

     

    I have found a solution. Actually I removed 192.168.1.0/24 from public string and then i tried 192.168.1.30/32 in string "xyz" and it worked. So my conclusion I can't use same interface in two strings.

     

    Thanks all