Hi Jen,
Just configure 2 rules referencing the same Range for source NAT or interface if NATing on the outbound interface.
The below config shows 9 subnets getting external access on the pool Public_Range01, this could also be made interface based Source NAT.
rule-set Office-to-Outside {
from zone Office;
to zone untrust;
rule Office_LAN01 {
match {
source-address [ 10.1.1.0/24 10.1.3.0/24 10.1.7.0/24 10.1.9.0/24 ];
}
then {
source-nat {
pool {
Public_Range01;
}
}
}
rule Office_LAN02 {
match {
source-address [ 10.17.1.0/24 10.18.2.0/24 10.1.22.0/24 10.1.33.0/24 10.1.83.0/24];
}
then {
source-nat {
pool {
Public_Range01;
}
}
}
}