SRX Services Gateway
SRX Services Gateway

SRX 11.2R2.4 NAT64

‎10-07-2011 01:32 AM
I am using SRX100 with JUNOS 11.2R2.4 In release notes document, it claim that NAT64 is supported. But it seems that NAT64 is a little bit difference with RFC 6146 or what I can configure in the Juniper Router http://www.juniper.net/techpubs/en_US/junos10.4/information-products/topic-collections/nce/nat64-ipv... Does anyone has experience on success configure NAT64 to work on SRX series? I've got a modified OpenBSD to act as the NAT64 gateway now but I want to merge that to the SRX. Please advise. Thanks!
2 REPLIES 2
SRX Services Gateway

Re: SRX 11.2R2.4 NAT64

‎02-06-2012 04:26 PM

i've attached working config, please refer to below link,

 

http://forums.juniper.net/t5/SRX-Services-Gateway/NAT64-in-Junos11-4/m-p/125193/highlight/false#M157...

 

thanks,

Raheel

Follow me on Twitter @anwar_raheel

--
If this post was helpful, please mark this post as an "Accepted Solution".
Kudos are always appreciated!
SRX Services Gateway

Re: SRX 11.2R2.4 NAT64

‎05-12-2012 12:34 PM