SRX Services Gateway
Highlighted
SRX Services Gateway

SRX 3400 Point to point ping issue

‎07-10-2015 08:08 AM

Hi 

I want to ping SRX3400 via with MX480 point to point , but it dosent happened . 

 

i simply give 2.1.1.1/30 to ge-0/0/2 to  MX 480 and on SRX ge-0/0/4    2.1.1.2/30 .

 

please advise me if any settings on SRX , regarding zones , security , in bound traffic .

 

please note its a new firewall .

 

thanks

3 REPLIES 3
Highlighted
SRX Services Gateway

Re: SRX 3400 Point to point ping issue

‎07-10-2015 08:31 AM

Hello ,

 

Just create a security zone and put that interface into the security zone and allow host inbound traffic ping .

 

# set security zone security-zone  <zone-name >  interface ge-0/0/2.0 host-inbound-traffic system services all

 


Thanks,
Sam

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too .....
Highlighted
SRX Services Gateway
Solution
Accepted by topic author muzzikhan
‎08-26-2015 01:27 AM

Re: SRX 3400 Point to point ping issue

‎07-10-2015 08:38 AM

Hello ,

 

Please check the link for the same : http://kb.juniper.net/InfoCenter/index?page=content&id=KB16556


Thanks,
Sam

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too .....
Highlighted
SRX Services Gateway

Re: SRX 3400 Point to point ping issue

‎07-10-2015 11:31 AM

Many thanks appriciated .

Feedback