SRX Services Gateway
SRX Services Gateway

SRX 3600 reth port issue

‎05-04-2017 06:31 AM

May 2 13:28:59 NB1_SRX_Node0 rpd[1312]: Decode ifd ge-15/0/4 index 181: ifdm_flags 0xc001
May 2 13:28:59 NB1_SRX_Node0 rpd[1312]: krt_inherit_ifd_aps_flags ge-15/0/4 index 181: <> from self
May 2 13:28:59 NB1_SRX_Node0 rpd[1312]: EVENT ge-15/0/4.0 index 2684275464 address #0 0.10.db.ff.10.5
May 2 13:28:59 NB1_SRX_Node0 rpd[1312]: EVENT ge-15/0/4 index 181 address #0 0.10.db.ff.10.5
May 2 13:28:59 NB1_SRX_Node0 mib2d[1340]: SNMP_TRAP_LINK_DOWN: ifIndex 552, ifAdminStatus up(1), ifOperStatus down(2), ifName
ge-15/0/4
May 2 13:29:20 NB1_SRX_Node0 rpd[1312]: Decode ifd ge-15/0/4 index 181: ifdm_flags 0xc000
May 2 13:29:20 NB1_SRX_Node0 rpd[1312]: krt_inherit_ifd_aps_flags ge-15/0/4 index 181: <> from self
May 2 13:29:20 NB1_SRX_Node0 rpd[1312]: EVENT ge-15/0/4.0 index 2684275464 address #0 0.10.db.ff.10.5
May 2 13:29:20 NB1_SRX_Node0 rpd[1312]: EVENT ge-15/0/4 index 181 address #0 0.10.db.ff.10.5
May 2 13:29:20 NB1_SRX_Node0 mib2d[1340]: SNMP_TRAP_LINK_UP: ifIndex 552, ifAdminStatus up(1), ifOperStatus up(1), ifName ge-15/0/4
May 2 13:29:20 NB1_SRX_Node0 mib2d[1340]: SNMP_TRAP_LINK_UP: ifIndex 638, ifAdminStatus up(1), ifOperStatus up(1), ifName

 

Can you suggest the reason why the interface was down looking on the below logs

3 REPLIES 3
SRX Services Gateway

Re: SRX 3600 reth port issue

‎05-04-2017 06:52 AM

Hi Swati,

 

Looking into the logs it looks like the interface ge-15/0/4 flapped physically.

 

Please check if there is any cable issue or if the connected device on that interface ran into some issues at that time when the interface was down.

 

Hope this helps Smiley Happy

 

Thanks,
Pulkit Bhandari
Please mark my response as Solution Accepted if it Helps, Kudos are Appreciated too. Smiley Happy

SRX Services Gateway

Re: SRX 3600 reth port issue

‎05-04-2017 10:23 PM

the ports were used for cluster redundnacy.

No activity is performed which resulted in flap.

version is 12.1X46 on SRX 3600

set chassis cluster redundancy-group 1 interface-monitor ge-15/0/4 weight 255
set interfaces ge-15/0/4 gigether-options redundant-parent reth5

set chassis cluster redundancy-group 1 interface-monitor ge-2/0/4 weight 255
set interfaces ge-2/0/4 gigether-options redundant-parent reth5

 

SRX Services Gateway

Re: SRX 3600 reth port issue

[ Edited ]
‎05-04-2017 10:55 PM

Hi Swati,

 

 

Please provide the output of the below commands-

 

  • show chassis cluster interface detail
  • show chassis cluster information detail
  • show interfaces ge-15//04 extensive

 

Happy to Help Smiley Happy

 

Thanks and Regards,

Pulkit Bhandari