SRX Services Gateway
Highlighted
SRX Services Gateway

SRX DHCP address handout and option 66 to same pool

[ Edited ]
‎05-08-2015 08:30 AM

I am having issues getting my SRX to handout boot-server and an ip to devices on my pool.  Has anyone had exeperience with this and can give me some guidance?

 

Thank you,

Will

 

pool 192.168.12.0/24 {
                address-range low 192.168.12.10 high 192.168.12.254;
                router {
                    192.168.12.1;
                }
                boot-server http://www.example.org/sub/
            }

3 REPLIES 3
Highlighted
SRX Services Gateway

Re: SRX DHCP address handout and option 66 to same pool

‎05-08-2015 12:56 PM

Please check the KBs for details:

 

How to configure DHCP option 66 on a SRX device

http://kb.juniper.net/InfoCenter/index?page=content&id=KB26905

 

Configure DHCP Server

http://kb.juniper.net/InfoCenter/index?page=content&id=KB15754&smlogin=true

 

_
Regards
Malik
JNCIEx4, CCIE, HCIE, VCIX-DCV, VCIX-NV, CISSP, PMP

[If it helped to solve your problem, please mark it "Accept as solution"; Kudos are always Appreciated]
Highlighted
SRX Services Gateway

Re: SRX DHCP address handout and option 66 to same pool

‎05-08-2015 12:59 PM

MM,

 

I think I am already doing both these things describe in the articles.

 

Will

Highlighted
SRX Services Gateway

Re: SRX DHCP address handout and option 66 to same pool

‎05-11-2015 08:47 AM
Your configuration looks fine. Which Junos version are u running. If 12.1X series, please try using JDHCP config instead old/current DHCP config
Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too