SRX Services Gateway
SRX Services Gateway

SRX forward WOL

‎05-07-2019 10:40 AM

Im trying to replace a Cisco router with a SRX to just fwd WOL packets from a server network to multipule

subnets.

This was done easily on the Cisco router by telling it to fwd the bcast to the layer 3 subnets that are multipule hops away.

Under the SVI 

ip address 172.16.2.135 255.255.252.0
ip helper-address 172.17.99.255
ip helper-address 17.16.143.255
ip helper-address 10.0.9.255
ip helper-address 192.168.1.127

And then  setup the "forwarding" function to include

ip forward-protocol udp echo
ip forward-protocol udp discard

This works just fine.. But I need

How do i go about have an SRX do this ? The  SRX does not have direct connections to  those networks.

 

 

1 REPLY 1
SRX Services Gateway

Re: SRX forward WOL

‎05-07-2019 10:08 PM
Please refer KB28601 - Allow Wake-on-LAN packets to traverse an SRX

https://kb.juniper.net/KB28601
Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too