SRX Services Gateway
SRX Services Gateway

SRX node 1 (secondary) in cluster not syncing with NTP

‎11-20-2017 02:48 PM

 

primary (node 0 is ok)

however on secondary (node 1) getting following error

X.X.X@X.X.X> show ntp status
/usr/bin/ntpq: configured source-address in ntp.conf x.x.x.124 invalid.

Using one of the local addresses.

localhost:time out, nothing received

****request timed out

 

 

3 REPLIES 3
SRX Services Gateway

Re: SRX node 1 (secondary) in cluster not syncing with NTP

‎11-20-2017 05:09 PM
Pl refer following kb..


https://kb.juniper.net/InfoCenter/index?page=content&id=KB21725

Also configure the soruce-address which present on SRX..

*************************************
HTH.
Accept this as solution if it resolved your issue.
Kudos would be appreciated too.
SRX Services Gateway

Re: SRX node 1 (secondary) in cluster not syncing with NTP

‎11-20-2017 08:44 PM

I  got  NTP working in other SRX cluster environment. By the way I am using fxp0 interfaces as source to NTP. Below please

see an example output from secondary node (working one).   

 

 XXXXXX@working> show ntp associations

/usr/bin/ntpq: configured source-address in ntp.conf X>X>X.93 invalid.  -------->FXP0 floating IP

Using one of the local addresses.

     remote           refid      st t when poll reach   delay   offset  jitter

==============================================================================

*X>X>X.240   X.X.X.116    2 -  891 1024  377    2.009    0.204   4.432

X>X>X.241   .STEP.          16 -    - 1024    0    0.000    0.000 4000.00

 {secondary:node1}

 

 

But in this case we also sourcing NTP from FXP0 (floating) but getting following result

 

 XXX@notworkingone> show ntp associations

/usr/bin/ntpq: configured source-address in ntp.conf XXXXX124 invalid.-------->FXP0 floating IP

Using one of the local addresses.

localhost: timed out, nothing received

***Request timed out

 

 

So please help me to investigate, why the secondary node unable to contact the NTP server using the local interface, just like the other one  ?

SRX Services Gateway

Re: SRX node 1 (secondary) in cluster not syncing with NTP

‎11-20-2017 08:58 PM

Can you pl paste your config?


*************************************
HTH.
Accept this as solution if it resolved your issue.
Kudos would be appreciated too.