SRX Services Gateway
Highlighted
SRX Services Gateway

SRX not accessible via MGT interface - packet mode

‎07-07-2014 01:56 AM

During the weekend,

 

On my study lab, I activated one of the SRX from Flow based to Packet based . I noticed some wierd behaviour. After the reboot, I could not access the device via MGT interface..

 

Now today, Monday morning, I am able to do so, and everything looks okay. I did not make any changes. If it persisted, I was to now access via Console and check.

 

While it's back to normal now, m just curious whether anyone has ever experience such a behaviour? Does the reboot after "packet-mode" is enabled, speacial in a way? 

Regards,
Willys W.
2 REPLIES 2
Highlighted
SRX Services Gateway

Re: SRX not accessible via MGT interface - packet mode

‎07-07-2014 02:00 AM

It is weird, packet-mode and reboot should not affect MGT access.

 

Regards,

Raveen

Note: If this answers your question, you could mark this post as accepted solution, that way it helps others as well. Kudos will be cool if I earned it!
Highlighted
SRX Services Gateway

Re: SRX not accessible via MGT interface - packet mode

‎07-07-2014 02:10 AM

Hi ,

 

There is no separate reboot options to convert Flow to Packet mode.

 

Management interface is not involved  for normal routing.

 

May be if it was an SRX issue after reboot , then it could be due to ARP issues or may be it was due to high Control plane CPU ?

 

Control Plane cpu will be high immediately after reboot and it will reduce after few minutes.

 

 

Regards
rparthi
 

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated Too

Feedback