kbb,
No worries on it not working, i will provide you a config for access DHCP, we have tested here in our Lab and it seems to be working better then the old DHCP daemon, below would be your config per your posted setup,
too things to remember once you setup access you have to completely delete your system services dhcp config they will not work together. also if you SRX210 is pulling dhcp from your internet provider change your family inet dhcp to family inet dhcp-client this will put that config on the new dhcp daemon also.
set access address-assignment pool lan family inet network 172.17.1.0/24
set access address-assignment pool lan family inet range inside low 172.17.1.100
set access address-assignment pool lan family inet range inside high 172.17.1.110
set access address-assignment pool lan family inet dhcp-attributes name-server 8.8.8.8
set access address-assignment pool lan family inet dhcp-attributes router 172.17.1.1
set access address-assignment pool wireless family inet network 192.168.44.0/24
set access address-assignment pool wireless family inet range inside low 192.168.44.40
set access address-assignment pool wireless family inet range inside high 192.168.44.60
set access address-assignment pool wireless family inet dhcp-attributes name-server 8.8.8.8
set access address-assignment pool wireless family inet dhcp-attributes router 192.168.44.10
set system services dhcp-local-server group wireless interface fe-0/0/2.0
set system services dhcp-local-server group lan interface ge-0/0/0.0
Let me know if this works i have tested it in our lab many times and know it works.
James Brunk
Network Engineer
JNCIS-WLAN, JNCIS-SEC, JNCIS-ENT