SRX

last person joined: 4 days ago 

Ask questions and share experiences about the SRX Series, vSRX, and cSRX.

  • 1.  SRX210 as BGP route reflector

     
    Posted 08-06-2014 15:45

    I am setting up a lab using SRX210s and attempting to configure one as a route reflector but noticed the command 'cluster' was not available at the '[edit protocols bgp group Internal]' stanza as show below:

     

    admin@P2# set c?
    No valid completions
    [edit protocols bgp group Internal]
    admin@P2# set c

    Does the SRX not support this function?

     



  • 2.  RE: SRX210 as BGP route reflector
    Best Answer

    Posted 08-06-2014 19:25

    hello,

     

    this is a licensed feature nad needs license installed refer :

     

    http://www.juniper.net/techpubs/en_US/junos11.4/topics/concept/routing-protocol-bgp-security-route-reflector-understanding.html

    Note: For some Juniper Networks devices, you must have an Advanced BGP Feature license installed on each device that uses a route reflector. For license details, see the Junos OS Initial Configuration Guide for Security Devices .

     

    Regrads,

    c_r

    Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too



  • 3.  RE: SRX210 as BGP route reflector

     
    Posted 08-07-2014 14:23

    Thanks very much 🙂