SRX

VDSL2 Mini-PIM >> does it support up to 100Mbps speed ? if not ... what kind of srx210 slot support that ?

because i read at this link that it does support up to 40Mbps : http://www.1stadvance.com/product_info.php?cPath=133_9&products_id=12751&osCsid=1e407c438ea8411fc4f066d1e9b8b595

thanks in advance 🙂

Hi,

Looks like the VDSL2 mini-pim supportsa speed of 45440 kbps :-

Physical interface: pt-1/0/0, Enabled, Physical link is Up
 Interface index: 146, SNMP ifIndex: 524, Generation: 149
 Type: PTM, Link-level type: Ethernet, MTU: 1496, VDSL mode, Speed:    45440kbps
 Speed: VDSL2 

This output and configuration example is avilable in the following link :-

https://www.juniper.net/documentation/en_US/junos11.4/topics/example/vdsl2-pim-security-interface-configuring.html

Tha various profiles supported by the VDSL2 mini pim are :-

http://www.juniper.net/techpubs/en_US/junos12.1x47/topics/concept/vdsl2-pim-security-low-range-services-gateway-support.html

The built-in interfaces on the SRX 210 are explained in the following link :-

http://www.juniper.net/techpubs/en_US/release-independent/junos/topics/concept/built-in-interfaces-srx210.html

It supports Ge interfaces as well with speeds of 1000 Mbps.

Regards,

Sahil

{Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too }

first , thanks

second , i don't get it . if it says that profile 17a is support 100 data rate . so why at the output shows 40 ?

The output of the show interface you mean ? if so. You provider is profiling the services they are offering, The max of the profile is 100 mbit down. But But But! their are a lot of buts in place. If they only sell 40mbit you have to go with the max speed they are offering. The other but is the length and the state of the copperlines, 100 you will only reach when you are in a very short reach of the dslam (so your copper cable may not be longer then approx 700 meters). also the quality of the copper cable is a big but to train in to the max offered trainin speed the provider is offering.

A lot of buts that can prevent you from reaching the max configured speed on an xDSL connection.

thanks 🙂

So i understand that VDSL2 slot is support 100 Mbps if my infrastructure and ISP giving me 100 Mbps .

Yes If your ISP is offering 20 mbit instead of 100 you will never reach the 100mbit, If they offer 60 you will reach 60 as the max