SRX Services Gateway
SRX Services Gateway

SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-08-2018 03:09 PM

Hi all,

 

I just bought a used SRX220 with the SRX-MP-1VDSL2-A MPIM on eBay to use it as a home router (yes, i am crazy), and my ISP requires the VDSL Vectoring support, which was implemented in MPIM firmware v2.16. Currently my MPIM has the firmware version 2.10. My SRX220 has the JunOS version 12.1X46-D67 installed, but it seems that I need the separate firmware package in order to upgrade my mpim.

 

I am a private person, so I have no Juniper service contract, support and/or JTAC access. Can anyone advise where I can get this firmware package?

 

Thank you.

49 REPLIES 49
SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-08-2018 06:17 PM

Hi,

 

could you share the output for the following:

 

show system firmware
show version

 

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-08-2018 10:50 PM

Hi!

 

root@fw> show system firmware
Part             Type           Tag Current   Available Status
                                    version   version
FPC 2
  PIC 0          VDSLBCM        10  2.10.0              OK
Routing Engine 0 RE BIOS        0   2.8       2.8       OK
Routing Engine 0 RE BIOS Backup 1   2.8       2.8       OK
root@fw> show version
Hostname: fw
Model: srx220h-poe
JUNOS Software Release [12.1X46-D67] 
SRX Services Gateway
Solution
Accepted by topic author Vengant
‎02-09-2018 03:02 AM

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-08-2018 11:26 PM

 

Pick the jfirmware from here:

ftp://ftp.juniper.net/pub/incoming/srx_firmare/

 

1. Copy the firmware package from local downloaded location to your router path: /var/tmp/
Once the firmware package is copied on the router, software add the Jfirmware package:  

root@test> request system software add no-copy no-validate jfirmware-srxsme-12.1X46-D67.tgz
This will install the firmware package on router

2. Then firmware package should get listed on “show version”
               
3. Now, initiate the firmware upgrade through following CLI command:  

root@test> request system firmware upgrade pic fpc-slot X pic-slot X

4. Once the firmware initiated, check the status using:
>show system firmware

5. Once upgrade is successful, restart FPC 1 to make the upgraded firmware effective.  
root@root> restart fpc x

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-08-2018 11:34 PM

Hi!

 

Thank you, but the "pub/incoming" directory is blank.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-08-2018 11:39 PM
Check after sometime (2 hours), (just uploaded) it takes a while to sync.
/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-09-2018 01:34 AM

Hi!

 

Sorry, but there are still nothing in this folder after 2 hours. Could you please check?

 

Thank you.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-09-2018 03:03 AM

Everything is OK now, thanks!

 

root@fw> show system firmware
Part             Type           Tag Current   Available Status
                                    version   version
FPC 2
  PIC 0          VDSLBCM        10  2.16.0    2.16.0    OK
Routing Engine 0 RE BIOS        0   2.8       2.8       OK
Routing Engine 0 RE BIOS Backup 1   2.8       2.8       OK
SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎02-09-2018 03:09 AM

 

Glad to see that output.

Cheers

 

 

 

 

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-04-2018 04:09 AM

Hi,

 

I have the same issue with a SRX110h-va, which should also work with firmware 2.16. Could you please re-upload the firmware?

Currently I have 2.10 and the line is not synchronizing :

root@fw> show system firmware 
Part Type Tag Current Available Status
version version
FPC 1
PIC 0 VDSLBCM 10 2.10.0 OK
Routing Engine 0 RE BIOS 0 2.1 2.8 OK
Routing Engine 0 RE BIOS Backup 1 2.1 2.8 OK
Routing Engine 0 RE FPGA 14 1.0.0 OK

 

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-04-2018 04:18 AM

What junos version you're on?

 

 

 

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-04-2018 04:37 AM

Junos version is 12.1X46-D71

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-10-2018 01:15 AM

Hi Karan,

Could you find a firmware for my Junos version?

 

Regards,

Guillermo

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-10-2018 01:21 AM

 

Uploaded here:

ftp://ftp.juniper.net/pub/incoming/srx_firmare/

 

/volume/ftp/pub/incoming/srx_firmare]$ ls -l
total 8964
 9134767 Mar 10 01:19 jfirmware-srxsme-12.1X46-D71.tgz

 

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-16-2018 05:39 AM

I run Junos 12.348-D65.1 on my SRX110H2-VA. Could you upload the firmware for this version?

 

Regards

Denis

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-21-2018 02:54 AM

Me too...

I run Junos 12.348-D65.1 on my SRX110H2-VA. Could you upload the firmware for this version?

I've allso Jtac acocunt but I can't find firmware version... just softwawre like:

junos-srxsme-12.3X48-D65.1-domestic

 

Any one can help me?

 

Regards

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-21-2018 03:17 AM

 

Here:

ftp://ftp.juniper.net/pub/incoming/srx_firmare/

 

/ftp/pub/incoming/srx_firmare$ ls -l

Mar 21 03:10 jfirmware-srxsme-12.3X48-D65.1.tgz

 

 

 

 

/Karan Dhanak
# Please mark my solution as accepted if it helped, Kudos are appreciated as well.

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-21-2018 03:29 AM

Hi,

thank you for your prompt action.

Right now directory is empty. May I wait some minutes?

 

regards

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-22-2018 02:29 AM

thank you! it's working.

Updating firmware with 2.16 version on the PIC vDSL!

Maybe I'm the first one, but I can confirm you all that:

- Junos 12.348-D65.1 on my SRX110H2-VA. with:

- junos-srxsme-12.3X48-D65.1-domestic

 

In the other post about vDSL with tim italy provider in my case, I'll post the whole configuration with some details for make vDSL works.

 

Regards

SRX Services Gateway

Re: SRX220, SRX-MP-1VDSL2-A and VDSL Vectoring

‎03-22-2018 08:57 PM

Would it be possible to re-post that firmware again?  I'm in a similar situation have VDSLBCM 2.10.0, and have just moved from ADSL to VDSL w/Vectoring requirement (.au NBN FTTN).