SRX Services Gateway
SRX Services Gateway

SRX340 VC jflow config through management me0/em0 port

‎03-05-2019 02:15 AM

Hi,

 

We have SRX340 with Junos: 15.1X49-D120.3

I want to configure jflow through dedicated management port me0/em0  JTAC suggested the configuration on physical interface i.e. ge-0/0/0(they said, not supported on me0/em0)  but i want to use only dedicated management port.

Please suggest configuration

 

Thank you

1 REPLY 1
Highlighted
SRX Services Gateway

Re: SRX340 VC jflow config through management me0/em0 port

‎03-05-2019 02:21 AM

You could put a normal sub-interface into a separate routing instance that would isolate the traffic then use this port for all the mgmt and jflow functions. 

 

This will be then both supported by JTAC and functionally the same as using the dedicated port.'

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home