Hi,
The devices sends control link messages, but no one recives it.
But there is traffic both ways on the control link interfaces.
fab0 up up
fab0.0 up up inet 30.65.0.200/24
fxp1 up up
fxp1.0 up up inet 129.64.0.1/2
tnp 0x1400001
fxp2 up up
fxp2.0 up up tnp 0x1400001
---node0:
Cluster ID: 4
Node Priority Status Preempt Manual Monitor-failures
Redundancy group: 0 , Failover count: 0
node0 100 secondary no no None
node1 0 lost n/a n/a n/a
Redundancy group: 1 , Failover count: 0
node0 0 secondary no no None
node1 0 lost n/a n/a n/a
---node1:
Cluster ID: 4
Node Priority Status Preempt Manual Monitor-failures
Redundancy group: 0 , Failover count: 1
node0 0 lost n/a n/a n/a
node1 1 primary no no None
Redundancy group: 1 , Failover count: 1
node0 0 lost n/a n/a n/a
node1 0 primary no no None
--node0:
Control link status: Up
Control interfaces:
Index Interface Monitored-Status Internal-SA Security
0 fxp1 Down Disabled Disabled
Fabric link status: Down
Fabric interfaces:
Name Child-interface Status Security
(Physical/Monitored)
fab0
fab0
Redundant-pseudo-interface Information:
Name Status Redundancy-group
lo0 Up 0
--node1:
Control link status: Up
Control interfaces:
Index Interface Monitored-Status Internal-SA Security
0 fxp1 Down Disabled Disabled
Fabric link status: Down
Fabric interfaces:
Name Child-interface Status Security
(Physical/Monitored)
fab1 ge-5/0/2 Up / Down Disabled
fab1 ge-5/0/7 Up / Down Disabled
Redundant-ethernet Information:
Name Status Redundancy-group
reth0 Down 1
reth1 Down Not configured
Redundant-pseudo-interface Information:
Name Status Redundancy-group
lo0 Up 0
---node1: ....yes it's sending control link, but nothing recived. same at both nodes.
Control link statistics:
Control link 0:
Heartbeat packets sent: 233944
Heartbeat packets received: 0
Heartbeat packet errors: 0
Fabric link statistics:
Child link 0
Probes sent: 7822
Probes received: 0
--node0... control link is increasing, but nothing recived.
Control link statistics:
Control link 0:
Heartbeat packets sent: 2667
Heartbeat packets received: 0
Heartbeat packet errors: 0
Fabric link statistics:
Child link 0
Probes sent: 0
Probes received: 0
....from that point of view, things are pointing to the switch. Juniper EX4300.
set interfaces ge-1/0/16 description ***SEVIS004FW-NODE1_FAB***
set interfaces ge-1/0/16 mtu 9216
set interfaces ge-1/0/16 unit 0 family ethernet-switching interface-mode access
set interfaces ge-1/0/16 unit 0 family ethernet-switching vlan members FW811
set protocols rstp interface ge-1/0/16 edge
set interfaces ge-1/0/22 description ***SEVIS004FW-NODE1_Control_HA_Link***
set interfaces ge-1/0/22 mtu 9216
set interfaces ge-1/0/22 unit 0 family ethernet-switching interface-mode access
set interfaces ge-1/0/22 unit 0 family ethernet-switching vlan members FW810
set protocols rstp interface ge-1/0/22 edge
rstp-port is in forwarding state.
ge-1/0/22
Input rate : 17536 bps (32 pps) - seems to be communicating, but the cluster wont form
Output rate : 16960 bps (31 pps)
ge-1/0/16 (fab)
Input rate : 0 bps (0 pps) <-- nothing coming in here. Not sure if that's because control link aint comming up or why that migth happening. Will look into it.
Output rate : 256 bps (1 pps)