SRX Services Gateway
Highlighted
SRX Services Gateway

SRX3600 ISSU problem

‎01-24-2013 02:56 AM

Hi guys, I had the following problem upgrading the SRX3600 to latest 12.1R4.7 code.

 

SRX> request system software in-service-upgrade

 

all seems to have worked until you try to do a commit:

 

# commit full  
warning: ISSU in progress, commit disallowed

 

> request system software abort in-service-upgrade
error: command is not valid on the srx3600

 

I had to do the following to get is sorted:

http://kb.juniper.net/InfoCenter/index?page=content&id=KB26324&cat=JUNOS&actp=LIST&smlogin=true

http://www.juniper.net/techpubs/en_US/junos11.1/information-products/topic-collections/release-notes...

 

"If the output of this command is not zero, enter the sysctl hw.re.issu_state=0 command to clear the NSSU states on member"

 

I then rebooted the devices and I could see that there was a problem with the software versions in that only one of the devices were upgraded.

 

I disabled the cluster and did a manual upgrade before enabling the cluster.

 

 

 

1 REPLY 1
Highlighted
SRX Services Gateway

Re: SRX3600 ISSU problem

‎01-25-2013 06:07 AM

and then there is an easier method that you need to do only on the secondary device:

 

request chassis cluster in-service-upgrade abort

 

rather do a manual upgrade on both 😉

Feedback