SRX Services Gateway
Highlighted
SRX Services Gateway

SRX4100 CLUSTER

[ Edited ]
‎02-13-2019 12:45 PM

Dear  community 

 

I'm  trying  to build  a cluster between  2 srx4100 and i have few issues.   CTL and FAB interfaces are connected with 1G SFP-T trough  cisco nexus 5k devices, with 2 separate vlans. Igmp snooping is disable for both vlans. 

 

After setting the nodes priority (200 for node0 and 100 for node1) i noted that on node0 redundancy  group 0 node0 have priority 200 but for node1 proirity is 1.. on node1 i see priority 100 for himself  but node0 is with priority 1.  Rolese are ok on both nodes.: node0 is primary, node1 is secondary. .

 

If i reboot node1  i see that is in lost state on node0. The strange thing is after node1 is comming up : still remains  in lost on node0 and on himself all roles and priorities are ok.

 

Both firewalls have version 15.1x49-D160.2

 

Any ideea ? Smiley Happy

 

 

 

1 REPLY 1
Highlighted
SRX Services Gateway

Re: SRX4100 CLUSTER

‎02-13-2019 07:42 PM

Hello,

 

Indeed seems strange.

> Have you tried bypassing the switch to check the behavior?

> Can you provide the outputs of the following commands from both nodes?

    > show chassis cluster status

    > show chassis cluster information detail

    > show chassis cluster statistics (2-3 times)

    > show chassis cluster interfaces

> By any chance do you have any other SRX cluster connected to the same switch?

 

Regards,

 

Vikas