SRX Services Gateway
SRX Services Gateway

SRX650 Commit synchronization issue

3 weeks ago

Dear Friends ,

We have juniper SRX650 (12.1X46-D50.4) with HA enabled.

I have attached the cluster status.

show chassis cluster ethernet-switching status & shao chassis cluster status


While I am trying to commit from node1(Primary) which is not synchronizing with node0(Secondary)

It is remote and I am able to connect both nodes from "remote-local-machine" and both routing configuration is different , I want to synchronize node1(Primary) configuration to node0(secondary)

Support will be much appreciated


Thanks & Regards,



SRX Services Gateway

Re: SRX650 Commit synchronization issue

2 weeks ago

From the data here I think there is an issue with the vlan configuration on the local switches.  There seems to be a problem with the two SRX nodes in the cluster to communications on layer 2.


Can you access the local switches and verify the vlan configuration and port status for both SRX and all ports.


Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
SRX Services Gateway

Re: SRX650 Commit synchronization issue


Hi Sarath


The configuration is synchronized via the control-link of the cluster and the cluster status looks fine. When I opened the file "commit-output.JPG " I dont see a commit issue, is that picture correct?


Have you try "commit synchronize force"?


Here a couple of documents related to commit issues in cluster:



Please mark my answer as the Solution if it applies.