SRX Services Gateway
SRX Services Gateway

SRx in cluster send error: remote lock-configuration failed on node1

05.12.10   |  
‎05-12-2010 11:40 AM

Hi

 

When I change my configuration on the cluster and tried save the configuration using commit send the next error:

 

root@SRX# commit
node1:
error: configuration database modified
node0:
error: remote lock-configuration failed on node1

 

Do you know what is the problem?

 

Thanks

11 REPLIES
SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

05.12.10   |  
‎05-12-2010 06:15 PM

Hi,

 

Check the following post.

 

http://communities.juniper.net/t5/Ethernet-Switching/remote-lock-configuration-failed-on-fpc0-can-t-...

 

-John

John Judge
JNCIS-SEC, JNCIS-ENT,

If this solves your problem, please mark this post as "Accepted Solution". Kudos are appreciated.
SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

01.20.11   |  
‎01-20-2011 01:44 PM

I ran "commit synchronize force" and it resolved the issue

SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

01.28.11   |  
‎01-28-2011 08:41 AM

Thank you the "commit synchronize force" did the trick for me

SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

05.19.11   |  
‎05-19-2011 07:14 AM

Yes....very good.

 

Itś working after "commit synchronize force"..

 

thanks.

Highlighted
SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

04.18.12   |  
‎04-18-2012 09:17 AM

What a magic undocumented command !!!!!!! Thank you !!!!!!!!

SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

08.23.12   |  
‎08-23-2012 06:11 AM
After using the commit forcefully also failed to commit the config.
........
If this worked for you please flag my post as an "Accepted Solution".

Best Regards,
Suresh Mudhireddy
SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

[ Edited ]
05.03.13   |  
‎05-03-2013 11:27 PM

Solved the issue for me.

Bikash Bhattarai
Dristi Tech Pvt. Ltd
SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

06.25.13   |  
‎06-25-2013 10:40 AM

Command worked for me as well. 

 

SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

02.09.15   |  
‎02-09-2015 10:08 AM

It works for me. Thanks!!

SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

03.27.15   |  
‎03-27-2015 03:24 PM

Yes but did you have to enter 'configure shared' to get into 'edit' mode?  Also did the 'commit synchronize force' command cause a traffic drop or performance hit or any adverse results.

 

Thanks in advance,

SRX Services Gateway

Re: SRx in cluster send error: remote lock-configuration failed on node1

04.10.16   |  
‎04-10-2016 02:44 PM

Hi

 

I had a similear issue but I resolved it by connecting to the secondary node and do a rollback of the configuration. I belive it's a better way of solving it than commit synchronize force. In my case it solved the issue. I have created a blogpost on it here: https://networksandrants.wordpress.com/2016/04/10/secondary-node-locked-when-commiting/