Hello,
The above config worked properly, and here is the session info,
Session ID: 152506, Policy name: ABCD-NAT/6, State: Active, Timeout: 1788, Valid
In: 172.16.10.14/18498 --> 192.168.100.1/2445;tcp, If: reth2.254, Pkts: 4, Bytes: 164
Out: 192.168.1.1/2445 --> 192.168.2.253/59488;tcp, If: reth0.0, Pkts: 2, Bytes: 84
But can u explain me the steps the SRX is doing to reach inside server, The above config what you wrote to me are strange for me becz how destination NAT and source NAT are communicating with each other without any matching call between them.
Can you explain me step by step when the packet enters and exits SRX for the abive NAT ????