SRX Services Gateway
SRX Services Gateway

Static NAT - Route Based VPN

‎12-27-2009 05:10 PM

Hello,

 

What is the recommendation for applying NAT for overlapping subnets when using route based VPN's?  I was thinking of using a static NAT, but wasn't sure if the tunnel interface should be used instead of the physical interface.  Also, how does the static nat handle the flow in the opposite direction?  hanks.

 

-John

 

 

John Judge
JNCIS-SEC, JNCIS-ENT,

If this solves your problem, please mark this post as "Accepted Solution". Kudos are appreciated.
1 REPLY 1
SRX Services Gateway
Solution
Accepted by topic author firewall72
‎08-26-2015 01:27 AM

Re: Static NAT - Route Based VPN

‎12-29-2009 08:30 PM

Have a look at this application note.

 

http://kb.juniper.net/index?page=content&id=TN68&cat=J_SERIES&actp=LIST

 

-Richard