SRX Services Gateway
SRX Services Gateway

Trail SkyATP requirements

‎10-06-2019 10:23 PM

Hi 

 

Can anyone guide what are the requirements for getting a trail for SkyATP. The firewall i currently have is SRX1500 with IPS license.

 

regards

8 REPLIES 8
SRX Services Gateway

Re: Trail SkyATP requirements

[ Edited ]
‎10-06-2019 11:43 PM

There doesn't look to be any specific requirements per se, just follow the steps in the links below.

 

The Sky ATP trial is actually a vSRX instance, so it's not tied to any specific hadrware requirements. You may be able to negotiate a trial license for your SRX1500 via support or an account manager. Personally I find this a bit inconvenient, as I'd like to trial it directly on my own hardware with the minimal amount of fuss.

 

As and when you come to purchase and install on your own hardware, Sky ATP is supported on the SRX1500 with Junos 15.1X49-D33 or above.

 

Ref.  

https://www.juniper.net/documentation/en_US/release-independent/sky-atp/help/information-products/pa...

https://www.juniper.net/us/en/dm/free-vsrx-trial/

https://www.juniper.net/documentation/en_US/release-independent/licensing/topics/topic-map/advanced-...

SRX Services Gateway

Re: Trail SkyATP requirements

‎10-07-2019 02:00 AM

Hi  

 

Many thanks for your reply. Can you please confirm if appsecure license is mandatory for running skyatp or IPS license will suffice this requirement.

 

regards

Highlighted
SRX Services Gateway

Re: Trail SkyATP requirements

‎10-07-2019 02:26 AM

Hi,

 

It seems JSE bundle which includes AppSecure is mandatory to use Sky ATP. 

 

Ref: https://www.juniper.net/documentation/en_US/release-independent/sky-atp/topics/reference/general/sky...

 

Thanks,
Pradeep
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!

SRX Services Gateway

Re: Trail SkyATP requirements

[ Edited ]
‎10-07-2019 05:40 AM

Ah yes, Pradeep is correct, my apologies for neglecting to mention this. You need to be running JunOS Enhanced, which would involve the relevant license purchase. There is no upgrade path unfortunately, but your Juniper partner/account manager may be able to help in terms of costs. However, JSE is not required to run the trial vSRX instance.

SRX Services Gateway

Re: Trail SkyATP requirements

‎10-08-2019 08:45 AM

Hi,

 

If you have a current support contract on your SRX1500, you already have a Free Subscription to Sky ATP. You can enroll into Sky ATP Cloud through your Portal (which you can create an account with an active Support Sign-On). https://sky.junipersecurity.net/

 

As Sky ATP is entitlement based, you do not need to install a Sky ATP License on your SRX. Installation of a Sky ATP License only applies to vSRX.

 

If you require a Basic (Threat Feeds) or Premium Subscription, please contact your Account Team and they will be able to work with you on that purchase.

 

Regards,

....................................

Jason Frantz

JTAC Technical Support Engineer SBR Carrier, NFX, Sky ATP, JATP

JNCIS-Sec

Phone JTAC: +1 888-314-5822 (Toll free, US & Canada), +1 408-745-9500 (Other Countries)

Working Hours: 6:00 AM - 3:00 PM (PST) - Weekly Off Days: (Saturdays & Sundays)

JTAC Knowledge Base: http://kb.juniper.net

Customer Service Online: http://www.juniper.net/support

If you require assistance in my absence please call JTAC to speak with the next available Engineer.

If you would like to have your case re-assigned send an email to: case-reassign@juniper.net with your case number in the subject line.

SRX Services Gateway

Re: Trail SkyATP requirements

‎10-09-2019 04:29 AM

I have tried this today, but when I reach the Enrollment stage, enter the relevant command (from the Portal) within JWeb, click Enroll, I receive the error: "The enrollment process Failed. Please try again.". Any suggestions?

SRX Services Gateway

Re: Trail SkyATP requirements

[ Edited ]
‎10-09-2019 06:56 AM

@EMTSU wrote:

I have tried this today, but when I reach the Enrollment stage, enter the relevant command (from the Portal) within JWeb, click Enroll, I receive the error: "The enrollment process Failed. Please try again.". Any suggestions?


 

I think I have found the solution to my issue below, but am awaiting a restart to confirm:

 

https://www.juniper.net/documentation/en_US/release-independent/sky-atp/topics/task/installation/sky...

SRX Services Gateway

Re: Trail SkyATP requirements

‎10-10-2019 12:57 AM

The above worked for me to get onto the free tier with an SRX340.