SRX Services Gateway
Highlighted
SRX Services Gateway

Which way to go with address books with policy RTP traffic seems to get dropped

‎01-13-2016 02:39 AM

 

 

 

We have a router that is running JUNOS 12.1X46-D40.2. The issue I am seeing is that RTP traffic is been dropped "Oneway speach" If I place the address with an /32 address of each device it works. I was using a wild card like below. It would seem that traffic did not match it even if its within that address space. Is using it this way as designed?  

 

 

set security zones security-zone WAN address-book address WAN-2 10.1.0.0/16

 

Or should I be doing it this way?

set security zones security-zone WAN address-book address WAN-1 range-address 10.1.0.1 to 10.1.255.255

 

 

 

3 REPLIES 3
Highlighted
SRX Services Gateway

Re: Which way to go with address books with policy RTP traffic seems to get dropped

‎01-13-2016 03:20 AM

Hello ,

 

 

set security zones security-zone WAN address-book address WAN-2 10.1.0.0/16

 

This configuration should be enought .


Thanks,
Sam

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too .....
Highlighted
SRX Services Gateway

Re: Which way to go with address books with policy RTP traffic seems to get dropped

‎01-13-2016 04:51 PM

Good morning

 

Thank you for the reply

I can comfim this issue only happens with RTP traffic using an address range seems to be a work around for now. I will get a JTAC case logged. Effect SW version is 12.1X46-D40.2. Having smaller address spaces /32 /24 also works. It only seems to be an issue with /16 address spaces. 

 

Thanks Steve

Highlighted
SRX Services Gateway

Re: Which way to go with address books with policy RTP traffic seems to get dropped

‎01-13-2016 10:56 PM

Hello ,

 

Thanks for the followup and youir findings .


Thanks,
Sam

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too .....
Feedback