SRX Services Gateway
SRX Services Gateway

enabling web interface for irb.10 interface

‎02-13-2017 04:24 AM

Hi all,

i want to enable web interface for a irb.10.This interface has a ip address of 172.16.11.1.i can access it through ssh but when trying to access it through web.then can not access web gui.any idea and configuration for it pls post it....

 

 

Thanks 

 

Regards,

Asif Khan

2 REPLIES 2
SRX Services Gateway

Re: enabling web interface for irb.10 interface

‎02-13-2017 07:19 PM

Can you share below outputs

 

show system services | display set

show security zones | display set | match irb.10

show security zones security-zone junos-host

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too
SRX Services Gateway
Solution
Accepted by topic author Asifkhan
‎02-23-2017 05:38 PM

Re: enabling web interface for irb.10 interface

‎02-14-2017 04:02 PM

Add the interface to web management

 

set system services web-management https system-generated-certificate
set system services web-management https interface irb.10

For the zone that the interface belongs to allow https services ZONE_NAME is your zone.

 

 

 

set security zones security-zone ZONE_NAME host-inbound-traffic system-services https

 

 

 

 

Steve Puluka BSEET - Juniper Ambassador
IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
http://puluka.com/home