SRX

Hello,

I am trying configure logical tunnel on my SRX 210 in order to interconnect between virtual routers on the same router but the problem the lt-0/0/0's are not showing up when I issue the "show interface terse" command or any show interface commands. They do show up under the interface part of the conifg. I saw a earlier posting but don't think I have the cluster issue as stated in the other person's issue. Thanks for any help

Configs below:

5698> show interfaces terse
Interface               Admin Link Proto    Local                 Remote
fxp2                    up    up  
fxp2.0                  up    up   tnp      0x1             
gre                     up    up  
ipip                    up    up  
irb                     up    up  
lo0                     up    up  
lo0.1                   up    up   inet     1.1.1.1             --> 0/0
lo0.2                   up    up   inet     2.2.2.2             --> 0/0
lo0.3                   up    up   inet     3.3.3.3             --> 0/0
lo0.16384               up    up   inet     127.0.0.1           --> 0/0
lo0.16385               up    up   inet     10.0.0.1            --> 0/0
                                            10.0.0.16           --> 0/0
                                            128.0.0.1           --> 0/0
                                            128.0.0.4           --> 0/0
                                            128.0.1.16          --> 0/0
lo0.32768               up    up  
lsi                     up    up  
mtun                    up    up  
pimd                    up    up  
pime                    up    up  
pp0                     up    up  
ppd0                    up    up  
ppe0                    up    up        
st0                     up    up  
tap                     up    up  
vlan                    up    down

5698> show configuration interfaces
ge-0/0/0 {
    unit 0;
}
lt-0/0/0 {
    unit 0 {
        description LINK-TO-R2;
        encapsulation ethernet;
        peer-unit 1;
        family inet {
            address 192.168.10.1/30;
        }
    }
    unit 1 {
        description LINK-TO-R1;
        encapsulation ethernet;
        peer-unit 0;
        family inet {
            address 192.168.10.2/30;
        }
    }
    unit 2 {
        description LINK-TO-R3;
        encapsulation ethernet;
        peer-unit 3;                    
        family inet {
            address 192.168.10.5/30;
        }
    }
    unit 3 {
        description LINK-TO-R2;
        encapsulation ethernet;
        peer-unit 2;
        family inet {
            address 192.168.10.6/30;
        }
    }
    unit 4 {
        description LINK-TO-R1;
        encapsulation ethernet;
        peer-unit 5;
        family inet {
            address 192.168.10.9/30;
        }
    }
    unit 5 {
        description LINK-TO-R3;
        encapsulation ethernet;         
        peer-unit 4;
        family inet {
            address 192.168.10.10/30;
        }
    }
}
fe-0/0/2 {
    unit 0;
}
fe-0/0/3 {
    unit 0;
}
fe-0/0/4 {
    unit 0;
}
fe-0/0/5 {
    unit 0;
}
fe-0/0/6 {
    unit 0;
}
fe-0/0/7 {
    unit 0;                             
}
fxs-0/0/10 {
    description fxs1;
}
fxs-0/0/11 {
    description fxs2;
}
fxo-0/0/12 {
    description fxo1;
}
fxo-0/0/13 {
    description fxo2;
}
lo0 {
    unit 1 {
        family inet {
            address 1.1.1.1/32;
        }
    }
    unit 2 {
        family inet {
            address 2.2.2.2/32;
        }                               
    }
    unit 3 {
        family inet {
            address 3.3.3.3/32;
        }
    }
}

5698> show configuration routing-instances
R1 {
    description Routing-instance-R1;
    instance-type virtual-router;
    interface lt-0/0/0.0;
    interface lt-0/0/0.5;
    interface lo0.1;
}
R2 {
    description Routing-instance-R2;
    instance-type virtual-router;
    interface lt-0/0/0.1;
    interface lt-0/0/0.2;
    interface lo0.2;
}
R3 {
    description Routing-instance-R3;
    instance-type virtual-router;
    interface lt-0/0/0.3;
    interface lt-0/0/0.4;
    interface lo0.3;
}

Hi

You don't have any physical (fe or ge) interfaces in the output which is bad as well.

What hardware model is it? (show chassis hardware). Does it happen to be

SRX with media gateway version? They have been discontinued around 2010

so I suspect they will not work normally with newer Junos. What Junos do you

have? (show version).

Is your FPC online? Can you paste output of 'show chassis fpc pic-status' ?

Regards,

Raveen

Raveen,

Seems like the pic is not supported.

5698> show chassis fpc pic-status
Slot 0   Online       FPC
  PIC 0  Present      2xGE,6xFE,1x3G,2xFXS,1xFXO- Not Supported

5698>

PK,

Here are the outputs. Would I have to downgrade to an older Junos? Thanks

5698> show chassis hardware
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                AN4909AA0131      SRX210H-P-M
Routing Engine   REV 37   750-024364   AABB7403          RE-SRX210H-P-M
FPC 0                                                    FPC
  PIC 0          *** Hardware Not Supported ***
Power Supply 0  

5698> show version
Model: srx210h-p-m
JUNOS Software Release [11.4R1.6]


5698>

Hi

Yes you gave EOL equipment 

See tech bulletin

http://kb.juniper.net/InfoCenter/index?page=content&id=TSB15488

So I guess it does not support 11.4. I think there was a Juniper program of exchanging

these units to the supported ones (see above link). You should contact JTAC. If not possible,

you can try to downgrade to Junos 10.x to see if this brings interfaces back.

Pk,

Downgrading to version 10.4 did the trick. Thanks for all the help.