SRX Services Gateway
Highlighted
SRX Services Gateway

ospf is not activating in srx550

‎07-13-2016 05:47 AM

Dear All ,

 

OSPF is not activating in srx550 firewall .I have configured ospf and enabled all interfaces in ospf area but still ospf is not coming up and when i am doing "show ospf neighvor" it is not giving me any ouputs .I just want to know does it require licensesing to enable ospf in srx550 firewall.

2 REPLIES 2
Highlighted
SRX Services Gateway

Re: ospf is not activating in srx550

‎07-13-2016 06:05 AM

Hi,

 

Running OSPF on the SRX doesn not require any license.

 

Please check if you have OSPF enabled under host-inbound-services protocols for the zone through which you want to run OSPF.

 

You can check the zone using the following :-

#show  security zones | disp set | match <interface name>

 

Regards,

Sahil Sharma

---------------------------------------------------

Please mark my solution as accepted if it helped, Kudos are appreciated as well.

Highlighted
SRX Services Gateway

Re: ospf is not activating in srx550

‎07-13-2016 06:54 AM

Hi,

 

You can check for "show ospf interface" also.

It should display the ospf interfaces and the area.

 

"show ospf statistics" would also display the OSPF messages sent and received.

No output may indicate there's no active facing OSPF neighbor.

 

Cheers,

Ashvin