SRX Services Gateway
Highlighted
SRX Services Gateway

"is not within the subnet of any add ress on this interface error: configuration check-out failed" Error Message, when I commit command line

‎10-29-2014 09:31 PM

Hi support

 

I do config on Router SRX240 Juniper,

After load other config from SRX650 to SRX240 for testing, I try to change password "admin" , I got the error message 

 

"is not within the subnet of any add ress on this interface error: configuration check-out failed" Error Message, when I commit command line

 

Please help us.

Thanks

Vinh Ng.

 

1 REPLY 1
Highlighted
SRX Services Gateway

Re: "is not within the subnet of any add ress on this interface error: configuration check-out failed" Error Message, when I commit command

‎10-29-2014 10:01 PM

You need to have the webauthentication address part of the interface. Please add 10.10.10.1 to your interface on which you expect webauth requests.

 

below URL explains webauth config

http://www.juniper.net/documentation/en_US/junos12.1x46/topics/example/firewall-user-authentication-...

 

If this config is already in place, please provide the below 2 outputs from config mode.

 

root#show | no-more

root#show| compare

 

Thanks,

Suraj

Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too

 

Thanks,
Suraj
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too