SRX Services Gateway
SRX Services Gateway

show chassis routing-engine

a week ago

Hi all,

Typically we can see "no-forwarding" option at the many KB(s)  >show chassis routing-engine no-forwarding..

Can I ask please what is different between the following Junos-cli as  they have the same output?

  • >show chassis routing-engine no-forwarding..
  • >show chassis routing-engine

 

Thx

A

2 REPLIES 2
SRX Services Gateway

Re: show chassis routing-engine

a week ago
SRX Services Gateway
Solution
Accepted by topic author Arix
a week ago

Re: show chassis routing-engine

a week ago
In chassis cluster environment, when you execute a command in a node, that command will be executed in remote node also and you will get two outputs. One from local node and the other one from remote node. When you use "no-forwarding" option the command will not be executed on remote node and you will get only one output from local node.
Thanks,
Nellikka
JNCIE x3 (SEC #321; SP #2839; ENT #790)
Please Mark My Solution Accepted if it Helped, Kudos are Appreciated too!!!